• WE DO LONG RANGE RIGHT.

    JOIN LONG RANGE ONLY

    Ask questions. Share your experience. Talk rifles, reloading, optics, and hunting with people who put their gear to work.

    REAL EXPERIENCE.   SHARED KNOWLEDGE.
    JOIN THE COMMUNITY →
    Free account. Be part of the conversation.
    Already a member? Log in

Sako 75 V Picatinny Rail suggestions

MtnGadabout

New member
Joined
Dec 26, 2021
Messages
15
Reaction score
4
Points
3
Location
Montana

Looking for friction base suggestions for a Sako V 75/85 XL action. I have a suite of ultra mags that are eating all the single base versions I try. Leupold let the scope walk. Sako Optilock mounts get thrown off the dovetails. Wondering if bedding a set of Near Mfg friction rail will hold?? There are no tension screws on the rail against the rifle as the recoil keeps things tight...​

I think ideal will be Contessa Picatinny Rail for Sako 85 L/XL 20 MOA - however they seem sold out everywhere for now.​

What am I missing??
Cheers
 

J2shooter

Well-known member
Joined
Jan 10, 2020
Messages
2,175
Reaction score
3,033
Points
113
100% I would go with the near mfg 1 piece dovetail pic rail.

I doubt there's anything close to as good as that rail is for the 85.

I put one on a buddies finlight II. I would trust it. It's a little weird to me too that it taps on to lock against the dovetail but the near rail has a set screw to lock it in after you get it on for a little extra insurance. That's just what you have to deal with on that action. No need to bed anything on that setup I wouldn't think.

Go with Hawkins ultralight tactical rings or Nightforce ultralights. Doubt you'll have anymore problems with this setup.
 

J2shooter

Well-known member
Joined
Jan 10, 2020
Messages
2,175
Reaction score
3,033
Points
113
You're not running a lead sled or anything like that are you?
 

MtnGadabout

New member
Joined
Dec 26, 2021
Messages
15
Reaction score
4
Points
3
Location
Montana
100% I would go with the near mfg 1 piece dovetail pic rail.

I doubt there's anything close to as good as that rail is for the 85.

I put one on a buddies finlight II. I would trust it. It's a little weird to me too that it taps on to lock against the dovetail but the near rail has a set screw to lock it in after you get it on for a little extra insurance. That's just what you have to deal with on that action. No need to bed anything on that setup I wouldn't think.

Go with Hawkins ultralight tactical rings or Nightforce ultralights. Doubt you'll have anymore problems with this setup.
I did not think the Near mfg came with a set screw. Good to know. Thanks!
No lead sled but used bags to test (break) the mounting systems they arrive with.
 

J2shooter

Well-known member
Joined
Jan 10, 2020
Messages
2,175
Reaction score
3,033
Points
113
I got him to send me a picture to refresh my memory. This is looking up through the mag well and you can see the screw that is installed to prevent the rail from being able to back off. Looking for this online though I'm not really turning anything up. You May want to reach out through the Near website but I'm assuming he started adding this to the rails somewhere along the line, Maybe recently.

AndroVid_Pro_0085.jpg
 

J2shooter

Well-known member
Joined
Jan 10, 2020
Messages
2,175
Reaction score
3,033
Points
113
This picture shows a hole in the front slot of the rear dovetail portion. So when it's mounted and as far fwd as it can go then this threaded hole should be accessible. The screw will act as a block in front of the rear dovetail so that the rail can't come off.

There is a recoil lug on the rail that nests in the slot on the rear dovetail that handles the recoil when firing. The rail retention screw should never actually be used probably except for an accidental hard impact front to back. AndroVid_Pro_8370.jpg
 

MtnGadabout

New member
Joined
Dec 26, 2021
Messages
15
Reaction score
4
Points
3
Location
Montana
I got him to send me a picture to refresh my memory. This is looking up through the mag well and you can see the screw that is installed to prevent the rail from being able to back off. Looking for this online though I'm not really turning anything up. You May want to reach out through the Near website but I'm assuming he started adding this to the rails somewhere along the line, Maybe recently.

View attachment 14935
Thanks for the pic! That should work great. Their website videos neglect to mention the set screw. Thanks to your friend too!
 

Forum Sponsors

Top