Nosler 175 ABLR RL-26 7mm Rem Mag 26in Barrel

RBanta66

Active member
Joined
Apr 3, 2020
Messages
106
Reaction score
73
Points
28
Location
Virginia
Was able to do some shooting today. I was finalizing my loads for my 7mm Rem Mag 26 in barrel with 175gn ABLR. I shot 4 groups of three, all were sub moa but this was my best one .326 , not to bad I guess with a .284 diameter bullet. RL -26 66.8gn. .050 off the lands Hornady once fired brass annealed .002 neck tension. Still got some work to do with the Berger 175 Elite Hunter and chronograph the load for MV, but I'm getting close. IMG_20201005_145401884.jpg

Sent from my moto z4 using Tapatalk

 

Vol75

Member
Joined
May 12, 2019
Messages
61
Reaction score
27
Points
18
Was able to do some shooting today. I was finalizing my loads for my 7mm Rem Mag 26 in barrel with 175gn ABLR. I shot 4 groups of three, all were sub moa but this was my best one .326 , not to bad I guess with a .284 diameter bullet. RL -26 66.8gn. .050 off the lands Hornady once fired brass annealed .002 neck tension. Still got some work to do with the Berger 175 Elite Hunter and chronograph the load for MV, but I'm getting close. View attachment 5743

Sent from my moto z4 using Tapatalk
What speed areyou running in that load. I’m running 2825 in my 26 inch shooting 175 LRAB and I ain’t no where near your powder charge.
I want to say my load is 61.5 gr of rl 26
crazy accurate load with mild recoil.
 

RBanta66

Active member
Joined
Apr 3, 2020
Messages
106
Reaction score
73
Points
28
Location
Virginia
VOL75
I need to chronograph the load which I will do my next outing. I do have a muzzle brake so recoil is mild.
 

RBanta66

Active member
Joined
Apr 3, 2020
Messages
106
Reaction score
73
Points
28
Location
Virginia
Finally made it to the range to chrono the following load, 175gn ABLR 66.8grn of RL-26.
Average was 2947fps. Load was still right at half moa. Rifle factory Rem CDL 26in barrel, Timney Tigger, Bell & Carlson stock and radial muzzle brake.

 

Forum Sponsors

Top