• WE DO LONG RANGE RIGHT.

    JOIN LONG RANGE ONLY

    Ask questions. Share your experience. Talk rifles, reloading, optics, and hunting with people who put their gear to work.

    REAL EXPERIENCE.   SHARED KNOWLEDGE.
    JOIN THE COMMUNITY →
    Free account. Be part of the conversation.
    Already a member? Log in

Defensive Edge Suppressors ?

Broz

LRO Owner~Editor~Long Range Hunting Specilist
Joined
Apr 17, 2013
Messages
17,204
Reaction score
15,263
Points
113
Location
Foot of the Big Belt Mountains near Townsend MT.
Shawn, The suppressor you have on your LRKM at times. Does it by chance fit a rifle like mine that is threaded for the slab brake? Or, could you build me one that I could remove my brake and screw on?

Thanks
Jeff
 

BigBuck

New member
Joined
Feb 7, 2014
Messages
337
Reaction score
0
Points
0
Location
South
Shawn , After you answer Broz could you tell me how the suppressor works ? Does it act as a brake ? seems like it would allow more recoil ? and does it affect MV . not trying to hijack . Just figured you could kill 2 birds with one stone . Thnks

Broz you may already know the answers , if so say on my friend.......
 

Broz

LRO Owner~Editor~Long Range Hunting Specilist
Joined
Apr 17, 2013
Messages
17,204
Reaction score
15,263
Points
113
Location
Foot of the Big Belt Mountains near Townsend MT.
My experience with suppressors is limited. But they will steal your heart pretty quickly as far as I have seen after shoot some.

They work like a brake to reduce recoil, and I don't think they affect velocity or accuracy but the barrel harmonics will be different with them so I suspect a point of impact change when they are on.

Shawn or others on this sight are far more qualifies to answer these questions than me. But there is a good chance I will be getting to know the supressors better in the years to come.

Jeff
 

Daniel

Vice President
Staff member
Joined
May 9, 2013
Messages
1,010
Reaction score
712
Points
113
Location
Billings ,MT
Most suppressors take out more recoil than a brake, I have shot many rifles and hand guns with suppressors recently they are for sure a thing to love! my personal favorite is a brake over single shot rifle in .300 black out suppressed, a 220 grain bullet that doesn't make any more noise then a pellet gun it is a sweet deer and varmint set up!
 

Greg Duley

Member
Joined
Sep 16, 2013
Messages
267
Reaction score
14
Points
18
Location
Hawkes Bay, New Zealand
We've recently fitted a can to one of our 338 Lunatic Maxes. This one is a Bullpup prototype, that we built about 10 years ago. I'd like to think that maybe it might have inspired Shawn to build his LRKM's in some small way, but that might be a bit presumptuous!:D
Anyway, a can goes really well on a Bullpup design as they have the weight well back already and don't end up unbalanced/too muzzle heavy with a can on. This is a huge case to suppress, a maximum capacity full length improved 375 Cheytac necked down to 338, short neck, 50 degree shoulder. And this huge can works unbelievably well, all you hear is the bullet going down range and the smack when it hits - nothing from the gun at all!
No can will reduce recoil as much as a good angled port brake, as they just can't dump the gas fast enough. A big diameter can like this with a well designed internal brake will be not far away though, no sharper but just the push goes on a little longer and further as all the gas has to come out the hole in the end sooner or later. Still, if you can suppress a 14 pound all up rifle pushing a 300gn bullet at an easy 3250fps for 67,500psi, then you can suppress most things if you're prepared to carry a big enough can!





We suppress a lot of rifles, especially our short little dense timber rifles we call Bush Pigs. We can keep them around 6.5 pounds all up including can, and with an overall length the same as a 19" barreled carbine. Unbelievably handy in the tight stuff!

 
Last edited:

BigBuck

New member
Joined
Feb 7, 2014
Messages
337
Reaction score
0
Points
0
Location
South
Thanks Broz for the info good luck with your suppressor . Sounds awesome....
 

whin4

New member
Joined
Dec 31, 2013
Messages
1
Reaction score
0
Points
0
Greg,
Are you building those bullpups for customers? How light do you think one could be built in your 7mm SF on a SA Rem 700? Im guessing a short action could be used as the round is loaded through the back of the action?
 

Greg Duley

Member
Joined
Sep 16, 2013
Messages
267
Reaction score
14
Points
18
Location
Hawkes Bay, New Zealand
Whin,
No, haven't as yet. We've been investigating trying to build a carbon fibre stock for a bullpup, to try and get the weight down around 10 to 12 pounds all up. The alloy blocks and stocks just can't be got much lighter. Certainly a short action is no handicap, if not an advantage.
If you're happy with a 16lb or thereabouts rifle all up including scope, I'd suggest going with one of Shawn's LRKMs as he has those well sorted. That's if you can get on the waiting list. I think they're pretty popular - eh Jeff??!!
 

Shawn Carlock

LRO Sponsor and Editor
Joined
Apr 18, 2013
Messages
435
Reaction score
164
Points
43
Sorry it took me so long to see this thread (my bad). On suppressors, I agree with Greg totally on suppressor effectiveness, no can will reduce recoil like a good brake will but close. Can in magnum rifles produce a little more rifle movement but at a much slower softer rate. They are best compared to a constant shovel as opposed to the snap that is left of a brake rifle. I would gladly take the sound suppression with a little more rifle movement any day. We are building a over the barrel design for all standard LRKM's that will simply replace the brake and thread right on. These are titanium and of course not cheap but add only 1.5 lbs and 5 inches to the length of the rifle. You can have a LRKM with suppressor for 48" and 15.9 lbs, for a long range killing machine (so to speak) I just don't see how you can beat it.
 

270 Sender0

Member
Joined
Aug 16, 2014
Messages
94
Reaction score
0
Points
6
Location
North Idaho PF/CDA
Shawn,

Do you have suppressors for other types of rifles or only for the LRKM?


Just went over to the DE side and found the info. tks
 
Last edited:

Forum Sponsors

Top