Mark Dille
Well-known member
Other than in our store, we're just going to post this here. We made a very small batch run of the 7mm 134gr with a test sample of material that did not meet our specification ahead of time. We were doing a bit of experimenting, and the 134 was up for initial manufacturing already with our normal material. Anyway, it didn't pay off, which was fine.
However, since these were made with one of the new Stage 3 profiles, the terminal performance is still outstanding, it's just not what we advertise. If you already bought the 134s for this upcoming season and want to do a bit of load experimentation, or if you've never tried Afterburners and have been lurking in the shadows, a bit hesitant, the price point on these is hard to pass up on to get a few down range. You can find a bit more about what's different at the link below, but from a precision standpoint, these are top notch, it's just the grade of material used.
www.apex-outdoors.com
However, since these were made with one of the new Stage 3 profiles, the terminal performance is still outstanding, it's just not what we advertise. If you already bought the 134s for this upcoming season and want to do a bit of load experimentation, or if you've never tried Afterburners and have been lurking in the shadows, a bit hesitant, the price point on these is hard to pass up on to get a few down range. You can find a bit more about what's different at the link below, but from a precision standpoint, these are top notch, it's just the grade of material used.
Seconds - Aft .284" (7mm) - 134 gr | APEX OUTDOORS
.284" Caliber, 1:9.5" Min Twist Rate, 134 Grain, Seconds - Aft, 50 Count
www.apex-outdoors.com